Navitek Red S13 Airfed Welding/Grinding System True
The Navitek® S13 combines the best of autodarkening protection for welding, with one
of the largest clear grinding visors available on the market.
The Navitek® shell and all its polycarbonates are certified for grinding with the specific
standards EN 166B and EN 175B. The visor is made in perfectly clear 1,0mm thick polycarbonate.
The excellent ergonomics provides perfect protection of the forehead, the ears and the neck.
This high comfort level can be advanced once equipped with side vision in shade DIN 5: the
Navitek® S13 then provides a 160° vision to the welder, for improved safety and advanced
comfort. These side vision are made out of transparent shade DIN 5 polycarbonate.
The Navitek® S13 is equipped with the longitudinal headgear with 4 settings: height, width,
angle, and longitudinal adjustment for welders operating with corrective glasses.
Positionned into the liftable front frame, The new autodarkening S13 presents 2 major advantages:
1 - A revolutionary autodarkening filter restituting colors and enhancing contrasts. (clear view)
2 - An extra-large viewing area in a light and ergonomic helmet.
The S13 is indeed equipped with a specific glass-pack: the vision of colors and contrasts, in both
grinding and welding phases, is outstanding and uncomparable.
This true vision greatly improves the general quality of the welding cords, relieves the operator from
stress and over-concentration, and make possible digital display reading.
In addition, the viewing area of the S13 has been extended to 100x67mm, with a perfect positioning
and centering. This extra-large viewing area offers excellent optical classes 1/1/1/2.
The 4 arc sensors are associated to a very fast switching speed of 0,1ms for a flawless detection of the
welding arc, with all welding processes: electrodes, MIG/MAG, TIG and micro-TIG.
2 ranges of welding shades are available to the welder: from DIN 5 to DIN 8, and from DIN 9 to DIN 13,
in addition to the sensitivity level of the 4 arc sensors, and the delay which can be adjusted from 0,1s to 1,9s.
All the settings and parameters on the S13 are visible in a large and internal digital display, directly in front of the welder.
All control knobs on the S13 are soft-touch, making it easy to adjust even with gloves on.
The S13 is covered by a full 3-year warranty.
All versions of Navitek® are completed with an Airkos® respiratory protection unit. Powered
by a Lithium-ion battery, the Airkos® provides purified air inside the Navitek®, with a filtration
of Solid and Liquid Particles. An advanced alarm system informs the operator of low-battery
and clogged-filter to replace. 2 airflows are available to the operators, depending on their
application and environement.
When associated to the Airkos®, the Navitek® S13 helmet provides the filtration of Solid and Liquid
Particules (PSL). The bolted and flame retardant face seal guarantees a limited TH2 inward leakage
inside the headtop. The main filter on the Airkos® is classified as « Re-usable » (PRSL), and does not
need to be replaced after every shift. The visual and sound alarm will inform the operator when to replace the filter.
The PRSL filter of the Airkos® is equipped with a pre-filter, blocking the largest particules and extending
the lifecycle of the main filter. As an option, a pre-filter with active charcoals is available.
The Airkos® blower unit (PAPR) is approved and certified according to the EN 12941 standard, with and
only with the Navitek® headtop.
Completing the alarm for the clogged filter, the filtration unit is also equipped with a distinctive alarm for the battery,
informing the operator when the charge is running low.
The Airkos® is delivered with a standard 4-cell Lithium-ion battery. A heavy-duty battery with 6 Lithium-ion cells is
also available. When equipped with the standard battery (CR7020), the Airkos® can provide up to 10 hours of operating
time (with a new filter and on minimum airflow). Once equipped with the heavy-duty battery (CR7021),
the Airkos® offers up to 15 hours, under the same conditions.
According to the welding application, the close environment and the operator’s habits, it is possible to select between
2 airflows on the Airkos®. 180l/m is the minimum airflow. With a simple push on the control knob, the unit increases
the airflow to 220l/m.
A very large and padded belt provides an excellent comfort and a perfect support of the blower unit. As options, a padded
harness and/or a belt extension are available to complete the existing belt.
Each Navitek® S13 Airkos is delivered with its own storage bag. The Airkos® storage bag is perfect for transport and stock of buffer spare parts.
Clear grinding visor
Clear view for Colour and Contrast
XXL Viewing Area 100 x 67mm
DIN 5 to DIN 13 variable shade
4 arc sensors
Large viewing area
|LC Technology||Twisted Nematic|
|Standards||EN175B, EN166B, EN379|
|Outside Protection||Clear Polycarbonate|
|Vision Relevable||Renforcée 2 points|
|Grinding||Yes - Clear grinding visor|
|Headgear||Comfort - 4 settings|
|ARC sensors||4 - Independent|
|Switching speed||0,1 ms|
|Power||Solar + replaceable batteries|
|Applications||Electrodes, MIG/MAG, TIG, Micro- TIG Cutting|
|Delay setting||From 0,1 to 1,9s|
|Welding shade||Variable DIN 5-8 and DIN 9-13|
|Vision True Colours||Colours/ Contracts restitution|
|Viewing area||100 x 67mm|